2.0 mega pixel IP Cameras are designed for Network high definition surveillance based on Micron CMOS sensor with high-performance multimedia processor. It adopts the embedded Baseline Profile, MJPEG, JPEG and so on video encoding protocols. It has the advanced mega pixel technology with SD card storage and picture snapshot. It can intercommunicate with standard IPTV. It is a set of video capture, image processing, video transmission, video storage, video management functions in one type of high-definition, high-performance network camera. The design concept is all in one (highly integrated), Ready to go (Plug and Play), which greatly facilitates the user to install, use and maintenance. It is mainly to the requirements of higher-resolution images of high-end monitor market demand for applications, including, highways, banking, telemedicine, security checkpoints and other areas.

It has High-performance Multimedia Processor, SOC single-chip, high speed video frequency processor with built-in ARM9+DSP.
High-sensitivity and high signal-to-noise ratio (SNR)
The Optimized H.264 Main Profile@Level 3 compression algorithm is better to satisfy the transmission of High Definition video at low network bandwidth.
Max resolution is 1600*1200 real-time encoding.
It can support 10 users to visit at the same time.
Built-in Web Sever to realize remote surveillance, controlling and setting via IE
It can support 802.11b/g wireless network.
It supports upgrade by remote control.
It supports local or network storage. It is built-in SD slot. And it was integrated several network storage protocols
It supports privacy protection mode, we have different way to control the camera to open the privacy protection or not. When the privacy protection open, the remote surveillance and recording will be closed.
It supports dynamic IP address, LAN, Internet (ADSL and Cable Modem)
It supports bi-directional real time transmission of audio and broadcast.
It has network self-adapting technology to adjust video frame rate automatically according to the network bandwidth.
It provides video loss, motion detection and sensor alarm functions.
It provides RS485/RS232 serial port and built-in several decoding protocols. Also it supports transparent protocols
Auto-retrieve function and auto-connection network

Sensor: 1/3 inch CMOS, Minimum illumination 1 Lux
Auto Iris: DC drive (NOT SUPPORTED now)
Video compression: H.264 Main Profile@Level 3
Video resolution adjustable by IE and SDK: 1600 x 1200?1280×960,1280 x 720, 800 x 600
Video parameters adjustable by IE and SDK: Brightness, hue, contrast, saturation and image quality
Streaming Format: Video Streaming or Audio &Video composite Streaming
Video Frame Rate adjustable by IE and SDK:
1600 x 1200 1?15 frames/second
1280 x 960 1?25 frames/second
1280 x 720 1?30 frames/second
800 x 600 1?30 frames/second
Video Compression Bit rate adjustable by IE and SDK: 16Kbit/S?8Mbit/S
Audio Input: 1channel,linear input, Input Impedance:1KOhms
Audio Compression: G.726
Audio Output: 1channel, linear output,
two-way talk input: Audio two-way talk
Image Encrypting: Digital watermarking?AES Encrypt (not supported now)
Local recording: SD card recording and snapshot, Support IP-San storage (no need PC storage server) not supported now
Supported Protocols: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS,ARP, ICMP, POP3, NTP, Ipsec, UpnP, RTP, RTCP
System Interface: 10Base-T/100Base-TX Ethernet port, WiFi(802.11b/g) WiFi interface, 1 RS485
Alarm input: 1channel on/off input, support NO (open) or NC (closed), RFID technology,link with wireless detectors
Alarm output: 1 channel on/off output, 120VAC 1A/24VDC 1A
Power supply: DC 12V 1A
Power consumption: 6W Max
Work temperature : -10-55
Storage temperature: -20-70
Work humidity: 10-85%



There are no reviews yet.

Be the first to review “CENTAUR-IP200”