DS-K1T105M Standalone Access Control Terminal

DS-K1T105M Standalone Access Control Terminal

DS-K1T105M Standalone Access Control Terminal

DS-K1T105M Standalone Access Control Terminal

DS-K1T105M Standalone Access Control Terminal

DS-K1T105M Standalone Access Control Terminal

DS-K1T105M Standalone Access Control Terminal

DS-K1T105M Standalone Access Control Terminal Datasheet.pdf

DS-K1T105 is a series of standalone access control terminal, designed with a 2.8-inch LCD display screen. It supports two network communication methods (TCP/IP, and Wi-Fi), and supports offline operation.

Category: HikVision Access Controls

Description

System Parameters
Card Reading Frequency:		EM Card (DS-K1T105E/E-C): 125KHz; Mifare Card (DS-K1T105M/M-C): 13.56MHz
Valid Card/ Swiping Record:		100,000 Cards and 300,000 Swiping Card Records
Operation System:		Linux
Storage:		256M Storage
Card Reading Mode:		Supports EM card reading (DS K1T105E/E-C) Supports Mifare card reading, including card No. reading & writing function (DS-K1T105M/M-C)
Built-in Micro SD Card:		Max.32G
Camera:		2MP (Optional)
Processor:		≥1GHz, 32 Bit High-performance Processor

Device Interfaces
Accessible Card Reader:		Card Reader
Communication Mode:		TCP/IP, Wi-Fi, RS-485, and Wigand 26/34 (under the card reader mode only)
Output Interface:		Lock Relay × 1, Alarm Relay × 1
Transmission Rate:		TCP/IP, WIFI: 10/100Mbps Self-adaptive, RS-485: 19200 bps-N-8-1
Input Interface:		Tamper Alarm × 1, Exit Button × 1, Door Sensor × 1, Alarm Input × 2

General
LCD Screen:		320×240 LCD-TFT Display Screen
Working Current:		500mA ( without Locks)
Key Board:		Keyboard (Back light)
Power Supply:		12VDC
Audio:		Loudspeaker
LED Indicator:		Power/Status
Certification:		CE, FCC
Working Humidity:		10% to 90% (Non-Condensing)
Working Temperature :		-20°C to +65°C (-4°F to +149°F)
Dimensions (L×W×H):		122mm × 82mm × 23mm (4.8” × 3.2” × 0.9″)
Weight:		280g (9.88lb)